Clay Paky - Alpha Wash 1200

Alpha Wash 1200

C61072

Conform to the European Community Directives

The fitting mounts a high-pressure lamp that needs an external igniter

It is permissible to mount the fitting on normally flammable surfaces

Class 1 appliance according to standard EN 60598-1

The fitting is protected against penetration by solid bodies of over 12mm (0.47”) in diameter, but not against dripping water, rain, splashes or jets of water

Maximum temperature that can be reached on the external surface of the fitting, in a thermally steady state

This is the top washlight in its category: a 1200 W light with all the technological, structural and reliability pluses typical of the Alpha line. Its wide 11°-55° linear zoom, the complete CMY colour system, the purity of the colours obtained with select pure dichroic filters, the adjustable ovalizer filter, and its surprising brightness even at maximum beam angle mean it can be used for short, medium and long throw applications in professional and architectural lighting.

1200 W discharge lamp
Optical unit with extremely high luminous efficiency
Exceptional brightness even at maximum beam angle
11°- 55° electronic zoom + 3-step beam angle system
CMY colour system + colour wheel + linear CTO
Adjustable indexable ovalizer filter with 70° maximum beam angle
2 frost filters
Spectacular new design 0-100% dimmer + stop/strobe on a dedicated channel
Silent operation (“Silent Version” system supplied as standard)
High performance electronics
Modular construction for easy maintenance

details
accessories
download
multimedia
gobo and filters
paintwork
i.p. rights

POWER SUPPLIES

200 - 240V 50/60Hz
100 - 120V 50/60Hz
The power supply can be changed over with the built-in selector.

INPUT POWER

1550VA at 230V 50Hz (PFC Electronic ballast).

LAMP SOURCE

1200W discharge lamp
- Type: Osram Sharks HTI 1200W/D7/75
- Cap: SFc 10-4
- Color temperature: 7,500 K
- Luminous flux: 110,000 lm
- Average life: 750 h
- Hot Restrike

OPTICS

Elliptic reflector with high luminous efficiency
Electronic zoom 11°-55°
Possibility of obtaining 3 angular apertures (11°; 19°; 25°) without cutting in the Zoom.
Fresnel Lens: diameter 200 mm, focal length 140 mm.

COLOR SYSTEM

CMY Color Mixing.
4-color wheel (Ø 57mm) with interchangeable color filters: Satured Red, Congo Blue, CTB (7.500K), Wood + open
Linear CTO

EFFECTS SECTION

2 frost filters (light and heavy frost).
Indexable ovalizer with 70° max aperture.
0-100% dimmer on a dedicated channel.
Stop / strobe effect.

CONTROL AND PROGRAMMING

Max 20 DMX 512 control channels
DMX protocol signal: USITT DMX 512
Display: Graphic LCD Display
Pan/Tilt Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input and output
Software upload through DMX input

BODY

Aluminium structure with die-cast plastic cover.
Two side handles for transportation.
PAN and TILT lock for transport and maintenance.
The body of the projector can be coloured, choosing from the range of 14 colours available (minimum order: 6 pieces)

MOVING BODY

Angle:
- PAN = 450°, TILT = 252°
Max Speeds:
- PAN = 4.0 sec. (360°)
- TILT = 3.2 sec. (252°)
Resolution:
- PAN = 1.76°, PAN FINE = 0.007°
- TILT = 0.98°, TILT FINE = 0.004°
Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.

ELECTRONICS

Long life self-charging buffer battery.
Pre-set macros.
Function reset from the lighting desk.
"ENERGY SAVING" function: with the stop or total dimmer effect on, or with all the CMY filters full (black), consumption cut by 50%.
115/230 V switchable power supply.
ON/OFF lamp control from the lighting desk.
"HELP", "MEMO", "AUTOTEST" functions
Possibility to upgrade the software through the DMX 512 input.
ETHERNET connection.
Electronic control on each parameter.
DMX level monitoring on each channel.
Feedback information for each sensor and encoder.
Electronic repositioning of the effects

SAFETY DEVICES

Bipolar circuit breaker with thermal protection.
Automatic break in power supply in case of overheating.
Forced ventilation with axial fans.

WORKING POSITION

Functions in any position.
Hanging system: with fast-lock omega clamps (1/4 turn) on the base

CE MARKING

In conformity with the European Union Low Voltage Directive 2006/95/CE and Electromagnetic compatibility Directive 2004/108/CE.

ETL

This product is available, on demand, with ETLus Listed Mark, that complies with the UL 1573 standard.

WEIGHT

35,8 Kg (78 lbs 12 ozs)

	SHARKS HTI 1200 W/D7/75 (7500 K) OSRAM LAMP STANDARD code: L10082
	OMEGA STANDARD code: 183102/802 for fixing clamps
	SHARKS HTI 1200W /D7/ 60 ( 6000 K) OSRAM LAMP OPTIONAL code: L10055
	MSR 1200W/SA/DE GOLD (6000 K) PHILIPS LAMP OPTIONAL code: L10083
	CLAMPS OPTIONAL code: C21070 48-51mm, max 300 Kg hook for truss
	SAFETY CABLE OPTIONAL code: 105041/003 Ø 4mm, lenght 680mm safety cable
	FOAM SHELL OPTIONAL code: F21170
	ROXTER-CASE OPTIONAL code: F21218 Roxter-Case for 2 Alpha 1200 / Halo 1200 ( 2 foam shells included + wheels)
	CLEAR FILTER KIT OPTIONAL code: C61178