Clay Paky - Alpha Wash 1500 LT

Alpha Wash 1500 LT

C61315

Conform to the European Community Directives

The fitting mounts a high-pressure lamp that needs an external igniter

It is permissible to mount the fitting on normally flammable surfaces

Class 1 appliance according to standard EN 60598-1

The fitting is protected against penetration by solid bodies of over 12mm (0.47”) in diameter, but not against dripping water, rain, splashes or jets of water

Maximum temperature that can be reached on the external surface of the fitting, in a thermally steady state

The Alpha Wash 1500 LT is a washlight moving head generating a powerful long-throw coloured beam, dedicated to large shows and events in stadia or very large venues. The luminaire features a 12° to 55° zoom; the smallest aperture combined with the special lens system allows perfect colour washing at distances hardly reachable by other washlights.

High efficiency optical system (53,000 lux at 10 m)
1500W Lok-it discharge lamp
First washlight specially designed for long-throw applications
12°-32° linear zoom
Additional aperture range from 32° - 55° by using the diffusion filter
CMY colour system + linear CTO + colour wheel
2 adjustable “dynamic” beam shapers
0-100% dimmer on a dedicated channel
Silent operation
New generation high performance electronics
Eco-friendly: may be used instead of very much larger and more expensive spotlights
Modular construction for easy maintenance

details
accessories
download
gobo and filters
i.p. rights

POWER SUPPLIES

200 - 240V 50/60Hz

INPUT POWER

2.000VA at 230V 50Hz (PFC electronic ballast).

LAMP SOURCE

1500W discharge lamp:
- Type: Osram Lok-it 1500W
- Cap: PGJ50
- Color temperature: 6,000 K
- Luminous flux: 135,000 lm
- Average life: 750 h

OPTICS

Elliptic reflector with high luminous efficiency
Linear Zoom 12°-32°
Optional Diffuser filter 32° - 55°

COLOR SYSTEM

CMY Color Mixing
6-color wheel + open.
linear CTO.

3200K CTO filter on the color wheel

EFFECTS SECTION

2 adjustable and "dynamic" beam shapers: rotating ovalizer and rotating "diamond" filter
Hybrid 0-100% dimmer (electronic + mechanical)
Stop/strobe effect

CONTROL AND PROGRAMMING

max 22 DMX 512 control channels
DMX protocol signal: USITT DMX 512
Display: Graphic LCD backlit b/w Display
Pan/Tilt Resolution: 16 bit
Dimmer Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input and output
Software upload through DMX input

BODY

Aluminium structure with die-cast plastic cover.
Two side handles for transportation.
PAN and TILT lock for transport and maintenance.

MOVING BODY

Angle:
- PAN = 540°
- TILT = 252°
Maximum speeds
- PAN = 4.0 sec (360°)
- TILT = 3.2 sec (252°)
Resolution:
- PAN = 2.11°
- PAN FINE = 0.008°
- TILT = 0.98°
- TILT FINE = 0.004°
Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.

ELECTRONICS

Long life self-charging buffer battery.
Pre-set macros.
Function reset from control unit
"ENERGY SAVING" function: with the stop or total dimmer effect on, or with all the CMY filters full (black), consumption cut by 50%.
ON/OFF lamp control from the lighting desk.
Function reset from the lighting desk.
"AUTOTEST" function from menù
ETHERNET Ready.
Electronic monitoring with status error
Cooling system monitoring
DMX level monitoring on all channels
Internal data transmission diagnostics
Firmware Upgrade with no power
Firmware upload from another fixture

SAFETY DEVICES

Bipolar circuit breaker with thermal protection.
Automatic break in power supply in case of overheating.
Forced ventilation with axial fans.

WORKING POSITION

Functions in any position.
Hanging system: with fast-lock omega clamps (1/4 turn) on the base

CE MARKING

In conformity with the European Union Low Voltage Directive 2006/95/CE and Electromagnetic compatibility Directive 2004/108/CE.

ETL

This product is available, on demand, with cETLus Listed Mark, that complies with the UL 1573 and CSA C22.2 No. 166 standards.

WEIGHT

46,7 Kg (102 lbs)

	HTI 1500W/60/P50 LOK-IT (6.000 K) OSRAM LAMP STANDARD code: L10102
	OMEGA STANDARD code: 183102/802 for fixing clamps
	CLAMPS OPTIONAL code: C21070 48-51mm, max 300 Kg hook for truss
	SAFETY CABLE OPTIONAL code: 105041/003 Ø 4mm, lenght 680mm safety cable
	HANDLES OPTIONAL code: C61182 Handles set
	HEAVY FROST FILTER KIT OPTIONAL code: C61187
	FOAM SHELL OPTIONAL code: F21176 foam shell for Alpha 1500
	ROXTER-CASE OPTIONAL code: F21210 Roxter-Case (including 1 foam shell+wheels) for 1 Alpha 1500 / Shotlight Wash