200 - 240V 50/60Hz
100 - 120V 50/60Hz
The power supply can be changed over with the built-in selector.

850VA at 230V 50Hz (PFC electronic ballast)

575 W discharge lamp
- Type: Osram HMI 575W/SEL
- Cap: G22
- Color temperature: 6,000 K
- Luminous flux: 49,000 lm
- Average life: 1.000 h
- Hot Restrike

Elliptic reflector with high luminous efficiency
Electronic linear Zoom 4°- 50°
Fresnel Lens: diameter 200 mm, focal length 140 mm.
Motorized Top Hat for a perfect beam control

CMY color mixing.
Wheel fitted out for 4 color filters (Ø 57mm), 2 of which (Congo Blue and Saturated Red) are supplied.
Linear CTO

Linear Frost.
Indexable Ovalizer with max aperture 80°.
A state-of-the-art 0-100% dimmer.
Stop/strobe effect.

Max 20 DMX 512 control channels
DMX protocol signal: USITT DMX 512
Display: Graphic LCD Display
Pan/Tilt Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input and output
Software upload through DMX input

Aluminium structure with die-cast plastic cover.
Two side handles for transportation.
PAN and TILT lock for transport and maintenance.
The body of the projector can be coloured, choosing from the range of 14 colours available (minimum order: 6 pieces)

Angle:
- PAN = 450°, TILT = 252°
Max Speeds:
- PAN = 4.0 sec. (360°)
- TILT = 3.2 sec. (252°)
Resolution:
- PAN = 1.76°, PAN FINE = 0.007°
- TILT = 0.98°, TILT FINE = 0.004°
Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.

Long life self-charging buffer battery.
Pre-set macros.
"ENERGY SAVING" function: with the stop or total dimmer effect on, or with all the CMY filters full (black), consumption cut by 50%.
115/230 V switchable power supply.
ON/OFF lamp control from the lighting desk.
Function reset from the lighting desk.
"HELP", "MEMO", "AUTOTEST" functions
Possibility to upgrade the software through the DMX 512 input.
ETHERNET connection.
Electronic control on each parameter.
DMX level monitoring on each channel.
Feedback information for each sensor and encoder.
Electronic repositioning of the effects

Bipolar circuit breaker with thermal protection.
Automatic break in power supply in case of overheating.
Forced ventilation with axial fans.

Functions in any position.
Hanging system: with fast-lock omega clamps (1/4 turn) on the base

In conformity with the European Union Low Voltage Directive 2006/95/CE and Electromagnetic compatibility Directive 2004/108/CE.

This product is available, on demand, with ETLus Listed Mark, that complies with the UL 1573 standard.

27 Kg (59 lbs 6 ozs)