Clay Paky - Alpha Wash Halo 1200

Alpha Wash Halo 1200

C61078

Conform to the European Community Directives

The fitting mounts a high-pressure lamp that needs an external igniter

It is permissible to mount the fitting on normally flammable surfaces

Class 1 appliance according to standard EN 60598-1

The fitting is protected against penetration by solid bodies of over 12mm (0.47”) in diameter, but not against dripping water, rain, splashes or jets of water

Maximum temperature that can be reached on the external surface of the fitting, in a thermally steady state

The Alpha Wash Halo 1200 combines extraordinary brightness with the versatility of a 1200 W 80 V (3300 K) halogen lamp, which can be used with any power supply voltage required. It has a 14°- 64° linear zoom, CMY colour mixing, linear frost effect, electronic dimmer, adjustable ovalizer filter and stop/strobe. Its motorized top hat is an extraordinary device that ensures perfect light beam control. The Alpha Wash Halo 1200 is designed for the most professional lighting sectors. It combines a high-quality spotlight with the typical advantages of a halogen lamp: uniform light, warm shade of colour and gradual dimmer.

1200 W (80 V) halogen lamp
Optical unit with extremely high luminous efficiency
CMY colour system
14°-64° linear zoom
Motorized top hat
Adjustable indexable ovalizer filter
Linear frost effect
Extremely gradual electronic dimmer
Stop/strobe effect
Silent operation (“Silent Version” system supplied as standard)
High performance electronics
Modular construction for easy maintenance

details
accessories
download
multimedia
paintwork
i.p. rights

POWER SUPPLIES

200 - 240V 50/60Hz
100 - 120V 50/60Hz
The power supply can be changed over with the built-in selector.

INPUT POWER

1400 VA at 230 V 50 Hz.

LAMP SOURCE

1200W, 80V Halogen Lamp:
- Type: Philips Halogen 7009Z
- Cap: G22
- Color temperature: 3,250 K
- Luminous flux: 36,000 lm
- Average life: 200 h

OPTICS

Elliptic reflector with high luminous efficiency
Electronic linear Zoom 14°- 64°
Fresnel Lens: diameter 200 mm, focal length 140 mm.
Motorized Top Hat for a perfect beam control

COLOR SYSTEM

CMY Color Mixing

Supergel Rosco (n°)	% Cyan	% Magenta	% Yellow
68	0	53.0	100
26	100	0	0
21	100	26.0	0
74	0	29.0	100
79	0	40.0	100
20	100	43.0	0
19	100	19.5	0
15	100	55.0	0
90	0	100	0
80	0	48.0	100

EFFECTS SECTION

Frost with linear variation.
Indexable ovalizer.
0-100% electronic dimmer with an extremely gradual dimming and uniform color temperature field.
Stop / strobe effect.

CONTROL AND PROGRAMMING

Max 17 DMX 512 control channels
DMX protocol signal: USITT DMX 512
Display: Graphic LCD Display
Pan/Tilt Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input and output
Software upload through DMX input

BODY

Aluminium structure with die-cast plastic cover.
Two side handles for transportation.
PAN and TILT lock for transport and maintenance.
The body of the projector can be coloured, choosing from the range of 14 colours available (minimum order: 6 pieces)

MOVING BODY

Angle:
- PAN = 450°, TILT = 252°
Max Speeds:
- PAN = 4.0 sec. (360°)
- TILT = 3.2 sec. (252°)
Resolution:
- PAN = 1.76°, PAN FINE = 0.007°
- TILT = 0.98°, TILT FINE = 0.004°
Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.

ELECTRONICS

Long life self-charging buffer battery.
Pre-set macros.
"ENERGY SAVING" function: with the stop or total dimmer effect on, or with all the CMY filters full (black), consumption cut by 50%.
115/230 V switchable power supply.
ON/OFF lamp control from the lighting desk.
Function reset from the lighting desk.
"HELP", "MEMO", "AUTOTEST" functions
Possibility to upgrade the software through the DMX 512 input.
ETHERNET connection.
Electronic control on each parameter.
DMX level monitoring on each channel.
Feedback information for each sensor and encoder.
Electronic repositioning of the effects

SAFETY DEVICES

Bipolar circuit breaker with thermal protection.
Automatic break in power supply in case of overheating.
Forced ventilation with axial fans.

WORKING POSITION

Functions in any position.
Hanging system: with fast-lock omega clamps (1/4 turn) on the base

CE MARKING

In conformity with the European Union Low Voltage Directive 2006/95/CE and Electromagnetic compatibility Directive 2004/108/CE.

WEIGHT

29,5 Kg (64lbs 14 ozs)

	PHILIPS 1200 W 80V HALOGEN (3300 K) LAMP STANDARD code: L10084
	OMEGA STANDARD code: 183102/802 for fixing clamps
	CLAMPS OPTIONAL code: C21070 48-51mm, max 300 Kg hook for truss
	SAFETY CABLE OPTIONAL code: 105041/003 Ø 4mm, lenght 680mm safety cable
	FOAM SHELL OPTIONAL code: F21170
	ROXTER-CASE OPTIONAL code: F21218 Roxter-Case for 2 Alpha 1200 / Halo 1200 ( 2 foam shells included + wheels)