Clay Paky - CP Color 150-E

CP Color 150-E

C11185

Conform to the European Community Directives

The fitting mounts a high-pressure lamp that needs an external igniter

It is permissible to mount the fitting on normally flammable surfaces

Class 1 appliance according to standard EN 60598-1

Maximum temperature that can be reached on the external surface of the fitting, in a thermally steady state

The appliance is fully protected against the entry of dust

Jets of water aimed at the casing from any direction do not cause damage to the appliance

IP65 Protection rating: The appliance is fully protected against the entry of dust. Jets of water aimed at the casing from any direction do not cause damage to the appliance

The CP Color 150-E is a 150 W outdoor colour changer, particularly useful for illuminating the architectural, historical and artistic details of buildings, monuments, colonnades, fountains and all kinds of urban enhancements. It uses an extra-long-life lamp, and various optional filters are available for uniform beam diffusion.

Colour changer designed for outdoor illumination (IP65)
150W discharge lamp
CMY colour system with select pure colour filters
Utmost colour uniformity even at close range
0-100% perfectly linear dimmer
Beam angles from 10° to 80° with optional filters
4 optional frost filters, which may be used together in combination
Optional adjustable ovalizer filter
Adjustable over 100°
Automatic stand-alone operation (master/slave link)
Optional barndoors
Optional quick mount plate and balancing plate

details
accessories
download

POWER SUPPLIES

230V 50Hz
240V 50Hz
208V 60Hz
200V 50Hz
200V 60Hz

INPUT POWER

250VA at 230V 50Hz (650VA with PFC 70µF)

LAMP SOURCE

150W discharge lamp
- Type: Philips CDM-SA/T 150W/942
- Color temperature: 4.200 K
- Luminous flux: 127.00 lm
- Average life: 6.000 h
- Cap: G12

OPTICS

Elliptic reflector with a high luminous efficiency
10°-80° beam angle using the optional frost filters
Optional Ovalizer (beam shaper)

COLOR SYSTEM

CMY Color Mixing, with selected dichroic filters

EFFECTS SECTION

0-100% Dimmer for gradual dimming of the beam

CONTROL AND PROGRAMMING

5 DMX 512 control channels
DMX signal connection: 5 pole XLR input and output
"Stand Alone mode", with a wide choice of handy chases.

BODY

In die-cast aluminium and steel.
Epoxy powder painting.
Special anti-corrosion treatment.

SUPPORT

In steel painted with epoxy powders
Special anti-corrosion treatment.
Revolving up on 100°.
Optional quick mounting plate

SAFETY DEVICES

Two fixing points for safety chain.
Optional balancing plate
Cooling by convection

WORKING POSITION

Working in any position

CE MARKING

In conformity with the European Union Low VoltageDirective 2006/95/CEand Electromagnetic compatibilityDirective 2004/108/CE.

WEIGHT

17 kg (37 lbs 6 ozs)

	CDM-SA/T 150/942 (4200 K, 6000 H) PHILIPS LAMP STANDARD code: L10064
	SAFETY CABLE STANDARD code: 105041/001 safety cable Ø 4mm, lenght 1000mm
	Ø 205 MM FILTER MOUNT OPTIONAL code: C31160
	BARNDOORS OPTIONAL code: C31171
	PLATE FOR QUICK ATTACHMENT OPTIONAL code: C31163 Speeds up positioning on supporting structures.
	BALANCING PLATE OPTIONAL code: C31164 Prevents the product from tipping over when installed on unstable tubular structures
	ROTATING FIXING PLATE OPTIONAL code: C31174
	CARRYING HANDLES OPTIONAL code: C31175
	FROST FILTER "90" OPTIONAL code: 080380/001 Note: This filter can be used in combination with the frost filters 080380/002, 080381/001 or with the diffuser filter 080382/001
	FROST FILTER "400" OPTIONAL code: 080380/002 Note: This filter can be used in combination with the frost filters 080380/001, 080381/001 or with the diffuser filter 080382/001
	FROST FILTER "C" OPTIONAL code: 080381/001 Note: This filter can be used in combination with the frost filters 080380/001, 080380/002 or with the diffuser filter 080382/001
	Ø 205MM DIFFUSION FILTER OPTIONAL code: 080382/001 For a beam angle of up to 80°
	OVALISING FILTER Ø 205 MM OPTIONAL code: 080383/001 Adjustable for ovalised projections