Clay Paky - CP Color 575

CP Color 575

C11198

Conform to the European Community Directives

The fitting mounts a high-pressure lamp that needs an external igniter

Class 1 appliance according to standard EN 60598-1

Maximum temperature that can be reached on the external surface of the fitting, in a thermally steady state

The appliance is fully protected against the entry of dust

Jets of water aimed at the casing from any direction do not cause damage to the appliance

IP65 Protection rating: The appliance is fully protected against the entry of dust. Jets of water aimed at the casing from any direction do not cause damage to the appliance

The CP Color 575 is a 575 W outdoor colour changer, particularly suitable for illuminating historic buildings, architectural and artistic details, shopping centres and retail outlets. It can be fitted with two different lamps, with different colours and temperatures, and has various optional filters for uniform beam diffusion.

colour changer designed for outdoor illumination (IP65)
575W discharge lamp
CMY colour system with select pure colour filters
Utmost colour uniformity even at close range
0-100% perfectly linear dimmer
Beam angles from 10° to 80° with optional filters
3 optional frost filters, which may be used together in combination
Optional adjustable ovalizer filter
Adjustable over 90°
Automatic stand-alone operation (master/slave link)
Optional barndoors
Optional quick mount plate and balancing plate

details
accessories
download

POWER SUPPLIES

230V 50Hz
240V 50Hz
208V 60Hz
200V 50Hz
200V 60Hz

INPUT POWER

1650VA at 230V 50Hz (650VA with PFC 70µF)

LAMP SOURCE

575W discharge lamp
- Type: Osram HSR 575/60
- Color Temperature: 6,000 K
- Luminous flux: 49,000 lm
- Average life: 1000 h
- Cap: GX 9.5

OPTICS

Elliptic reflector with a high luminous efficiency
10°-80° beam angle using the optional frost filters
Optional Ovalizer (beam shaper)

COLOR SYSTEM

CMY Color Mixing, with selected dichroic filters

EFFECTS SECTION

0-100% Dimmer for gradual dimming of the beam

CONTROL AND PROGRAMMING

4 DMX 512 conrol channels
DMX signal connection: 5 pole XLR input and output
"Stand Alone mode", with a wide choice of handy chases.

BODY

In die-cast aluminium and steel.
Epoxy powder painting.
Special anti-corrosion treatment.

SUPPORT

In steel with epoxy powder painting.
Special anti-corrosion treatment.
Revolving up 90°.

SAFETY DEVICES

Automatic break in power supply in case of overheating.
1 line fuse.
Cooling by convection

WORKING POSITION

Operation in any position

CE MARKING

In conformity with the European Union Low VoltageDirective 2006/95/CEand Electromagnetic compatibilityDirective 2004/108/CE.

WEIGHT

33 kg (72 10 ozs)

	PHILIPS MSD 575 (6000 K, 3000 H) STANDARD code: L10071 Philips MSD 575 (6000 K, 3000 H)
	PHILIPS MSR 575/2 (7200 K, 1000 H) OPTIONAL code: L10072 Philips MSR 575/2 (7200 K, 1000 H)
	BARNDOORS OPTIONAL code: C31170
	Ø 205MM DIFFUSION FILTER OPTIONAL code: 080382/001 For a beam angle of up to 80°
	OVALISING FILTER Ø 205 MM OPTIONAL code: 080383/001 Adjustable for ovalised projections
	FROST FILTER 90 Ø 205 MM OPTIONAL code: 080392/001
	FROST FILTER 400 Ø 205 MM OPTIONAL code: 080392/002