Clay Paky - Shotlight Wash

Shotlight Wash

C61370

Conform to the European Community Directives

The fitting mounts a high-pressure lamp that needs an external igniter

It is permissible to mount the fitting on normally flammable surfaces

Class 1 appliance according to standard EN 60598-1

The fitting is protected against penetration by solid bodies of over 12mm (0.47”) in diameter, but not against dripping water, rain, splashes or jets of water

Maximum temperature that can be reached on the external surface of the fitting, in a thermally steady state

Shotlight Wash is a totally new kind of projector that combines an extraordinary 1500W discharge lamp washlight and a 3000W Xenon lamp strobe in just one device. The two wash/strobe functions are perfectly integrated and can be operator-controlled with either simultaneous or separate operation and special effects. The “strobe” function is provided by two semi-circular Xenon lamps working independently, i.e. they can flash together or separately, at different frequencies.

Washlight section:

1500 W Lok-it discharge lamp
Optical unit with extremely high luminous efficiency
Power may be set to 1500 or 1200 W
11°- 74° electronic zoom
CMY colour system + 2 colour wheels (6+6) + linear “Golden CTO”
Indexable and rotating ovalizing filter
“diamond effect” filter
Frost filter
0-100% hybrid dimmer (electronic + mechanical)
Three-phase pan/tilt motor for perfectly silent operation
High performance electronics and firmware
Modular construction for easy maintenance

Strobe section:

2 special, curved, pulsed Xenon lamps, 1500 W each Lamp life: 500 hours
Special shape mirror reflector
Each lamp is individually operated
0-100% intensity control with blinding effect
Flash rate 0-16 Hz
Automatic over-temperature safety
Automatic safety black-out in case of unstable frequency
Pre-set strobe effects and strobe/wash effects

details
accessories
download
multimedia
gobo and filters
i.p. rights

POWER SUPPLIES

200-240V 50/60Hz

INPUT POWER

Wash: 2000VA at 230 V 50 Hz (PFC electronic ballast)
Strobo: 3000VA

LAMP SOURCE

Wash: 1500W discharge lamp
- Type HTI 1500W/60/P50-L Lok-it Osram
- Cap PGJ50
- Colour temperature 6,000 K
- Luminous flux 135,000 lm
- Average life 750 h

Strobe: pulsed Xenon 1500W lamp (x2)
- Type ER 9902 CPY [H]
- Average life 500 h

OPTICS

Wash:
- Elliptic reflector with high luminous efficiency
- Electronic Zoom 11°-74°
- Diffuser lens (11° to 13°; Linear to 74°)
Strobe:
- Special shape mirror reflector

COLOR SYSTEM

- CMY Color Mixing + linear CTO
- 2 color wheels, each with 6 pure and selected color filters
- CTO and CTB filters on the color wheels

EFFECTS SECTION

wash:
- 1 frost filter
- Indexable beam shaper
- "Diamond Effect" rotating filter
- Hybrid 0-100% dimmer (electronic + mechanical)
- Stop/strobe effect

CONTROL AND PROGRAMMING

Max 29 DMX 512 control channels
DMX protocol signal: USITT DMX 512
Display: Graphic LCD backlit b/w Display
Pan/Tilt Resolution: 16 bit
Dimmer Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input and output
Software upload through DMX input

BODY

Aluminium structure with die-cast plastic cover.
Two side handles for transportation.
Device locking PAN and TILT mechanisms for transportation and maintenance.

MOVING BODY

Travel:
- PAN = 540°
- TILT = 252°
Maximum speeds:
- PAN = 4.0 sec (360°)
- TILT = 3.2 sec (252°)
Resolution:
- PAN = 2.11°
- PAN FINE = 0.008°
- TILT = 0.98°
- TILT FINE = 0.004°
Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.

ELECTRONICS

Long life self-charging buffer battery.
Pre-set macros.
Function reset from control unit
"ENERGY SAVING" function: with the stop or total dimmer effect on, or with all the CMY filters full (black), consumption cut by 50%.
ON/OFF lamp control from the lighting desk.
Function reset from the lighting desk.
"AUTOTEST" function from menù
ETHERNET Ready.
Electronic monitoring with status error
Cooling system monitoring
DMX level monitoring on all channels
Internal data transmission diagnostics
Firmware Upgrade with no power
Firmware upload from another fixture

SAFETY DEVICES

Bipolar circuit breaker with thermal protection.
Automatic break in power supply in case of overheating.
Forced ventilation with axial fans.

WORKING POSITION

Working in any position.
Hanging system: with fast-lock omega clamps (1/4 turn) on the base

CE MARKING

In conformity with the European Union Low Voltage Directive 2006/95/CE and Electromagnetic compatibility Directive 2004/108/CE.

WEIGHT

46,5 Kg (102 lbs, 5 oz)

	HTI 1500W/60/P50 LOK-IT (6.000 K) OSRAM LAMP STANDARD code: L10102
	PULSED STROBO XENON ER 9902 CPY LAMP (X2) STANDARD code: L10201
	OMEGA STANDARD code: 183102/802 for fixing clamps
	CLAMPS OPTIONAL code: C21070 48-51mm, max 300 Kg hook for truss
	SAFETY CABLE OPTIONAL code: 105041/003 Ø 4mm, lenght 680mm safety cable
	HANDLES OPTIONAL code: C61182 Handles set
	FOAM SHELL OPTIONAL code: F21176 foam shell for Alpha 1500
	ROXTER-CASE OPTIONAL code: F21210 Roxter-Case (including 1 foam shell+wheels) for 1 Alpha 1500 / Shotlight Wash