Spheriscan

C11260

Spheriscan Spheriscan
Spheriscan
Conform to the European Community DirectivesThe fitting mounts a high-pressure lamp that needs an external igniterClass 1 appliance according to standard EN 60598-1 Maximum ambient temperatureMaximum temperature that can be reached on the external surface of the fitting, in a thermally steady stateC ETL USProtected against dust and Protected against splashingThis product  is supplied in compliance with European Directive 2012/19/EU - Waste Electrical and Electronic Equipment (WEEE). To preserve the environment please dispose/recycle this product at the end of its life according to the local regulationNot suitable for household illuminationThis product is intended for the following areas of application: studios, stages, theaters, exhibitions, trade fairs, events, theme parks, entertainment venues, architectural lighting and similarMinimum distance of illuminated objects

Spheriscan is a revolutionary scanner with a modern twist. The Spheriscan’s pan rotation does not have an end-stop: its mirror goes on turning endlessly beyond 360 degrees, which creates an absolutely original swirling effect. Its speed may be adjusted as desired and reach a maximum of 250 rpm, that is more than four revolutions per second! Spheriscan is without a doubt much more powerful and brighter than any of the other scanners that came before it. Its spanking new OSRAM lamp works at  1200 W.

Spheriscan features a 13°-34° high speed zoom, 1 rotating gobo wheel with 6 gobos, 1 fixed gobo wheel with 8 gobos, a rotating prism, a fast sixteen-blade iris, a linear frost filter, CMY system, a 7-color wheel.

A RGB system, built into the top head, turns it into a glowing transparent dome. Three dedicated DMX channels allow for unlimited colors.

Spheriscan is built to be used outdoors (IP54). Using a special optional support system, Spheriscan may be recessed into the stage floor, with only its transparent head visible, to create original gazing projections.

Lastly, you can also use the Spheriscan to project light directly, without the mirror (SPHERILIGHT configuration).

Spheriscan is therefore a tribute to the past with an endless variety of state-of-the-art technical features. It is a powerful effects light capable of adding a new distinctive touch to shows and an appliance you can use on many occasions, including big events, indoor and outdoor concerts and architectural installations.

 

 

  • 1400W OSRAM lamp (6000 K) working at 1200W
  • 80mm front lens diameter
  • 13°-34° Zoom
  • Mirror turning very fast over 360° and without stop (250rpm)
  • CMY System +7-color wheel
  • 3 RGB leds under the dome
  • 6 rotating gobos + 8 fixed gobos
  • 8-facet rotating prism
  • 16 blades fast iris
  • Variable frost
  • Fast stop/strobe effect
  • Art-Net / RDM
  • High performance electronics and firmware
  • IP54 Protection rating (the first moving mirror light for Outdoor use)
  • Conversion into Spherilight configuration (without mirror) to project light directly
  • It may be recessed to create original grazing projections

 

POWER SUPPLIES

200/240V 50/60 Hz

INPUT POWER

1600 VA

LAMP SOURCE

OSRAM Lok-it 1400-PS Lamp, working at 1200W
- Color Temperature: 6,000 K
- Life: 750 hrs
- Luminoux flux: 120,000 lm
- Base PGJ28 Lok-it!

OPTICS

80mm front lens diameter
13°-34° Zoom range
Electronic Focusing

COLOR SYSTEM

CMY System
Color Wheel with 7 color filters
Three R+G+B LEDs incorporated into the glowing transparent dome

EFFECTS SECTION

Wheel with 6 interchangeable and indexable rotating gobos (26mm diam. image)
Wheel with 8 static gobos (25mm diam. image)
8-facet Rotating prism
16 blades fast Iris
Variable "heavy" frost filter
Very precise 0-100% dimmer
Fast stop/strobe effect

CONTROL AND PROGRAMMING

31 or 35 DMX 512 control channels
DMX protocol signal: USITT DMX 512
ART-NET
Display: LCD 128 x 64 bit, backlit LED, white on black
Pan and Tilt Resolution: 16 bit
Focus Indexing Resolution: 16 bit
Dimmer Resolution: 16 bit
Rotation gobo Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 5 pole XLR input and output
Software upload through DMX input / Ethernet input

BODY

Aluminium and steel structure with plastic cover
Circular handle and moving bracket for transportation
IP54 protection rating
It is possible to convert the fixture into SPHERILIGHT (C11270) to project light directly. In this configuration, the fixture may be protected to IP54 by fitting an optional transparent cover over the front lens (C21092)

MOVING MIRROR

PAN
Angle Rotation: 360° continuous rotation
Fast speed: 717 ms
Normal Speed: 5442 ms
Resolution PAN: 1.4118°
Resolution PAN FINE: 0.0055°

TILT
Angle Rotation: 60°
Fast speed: 239 ms
Normal Speed: 1174 ms
Resolution TILT: 0.2353°
Resolution TILT FINE: 0.0009°

SUPPORT

±45° swivel bracket movement
Circular handle and moving brackets for transportation
Optional handles allow the fixture to be ground recessed for grazing projections

ELECTRONICS

Long life self-charging buffer battery.
Function reset from control unit
ON/OFF lamp control from the lighting desk.
Function reset from the lighting desk.
"AUTOTEST" function from menu.
Electronic monitoring with status error.
Cooling system monitoring.
DMX level monitoring on all channels.
Internal data transmission diagnostics.
Firmware Upgrade with no power.
Firmware upload from another fixture.

SAFETY DEVICES

Automatic break in power supply in case of overheating
Forced ventilation with fans

WORKING POSITION

Vertical or horizontal ±45° Working Position to ensure IP54
Hanging system: with fast-lock omega clamps (1/4 turn) on bracket

CE MARKING

In conformity with the European Directives:
• 2014/35/EU - Safety of electrical equipment supplied at low voltage (LVD)
• 2014/30/EU - Electromagnetic Compatibility (EMC)
• 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS)
• 2009/125/EC - EcoDesign requirements for Energy-related Products (ErP)

WEIGHT

31.5 Kg (69.4 lbs)
35 Kg (77 lbs) with brackets

Spheriscan
OSRAM Lok-it! HTI 1400/PS (6000 K) Lamp
OSRAM LOK-IT! HTI 1400/PS (6000 K) LAMP
STANDARD
code: LAM00D
Handles Kit
HANDLES KIT
OPTIONAL
code: C21090

Special handles kit for ground recessing

Fixing Kit
FIXING KIT
OPTIONAL
code: C21091

Kit for fixing the fixture upside down to the truss

Cover Kit
COVER KIT
OPTIONAL
code: C21092

Polycarbonate cover with UV protection, to transform Spheriscan into Spherilight

MAINTENANCE TOOLBOX

Please login

To access these documents (wiring diagrams, spare parts, firmware, schematics, ...) please fill in email and password.


Forgot your password?

Not registered? Please request your access!

Fields marked with an asterisk (*) are required.









Clay Paky and its successful venture at Plasa 2016
September 22, 2016
“The Clay Paky lights at Plasa 2016 were captivating and successful,” said Pio Nahum, Clay Paky CEO, when he got back from the London show, which has finally returned to Earls Court and its historical venue, Olympia. The industry met the stylish... read more
New Clay Paky Spheriscans on stage with Vasco Rossi
August 2, 2016
Italy – Vasco Rossi is back, and he is in great shape. He kicked off his new summer tour with a zero date at the Lignano Sabbiadoro stadium on 18 June. The "unauthorized exclusive preview" announcement arrived in a post on Vasco's Facebook page.... read more
A&L's Clay Paky Appreciation Night in Singapore
June 24, 2016
Singapore – On 26th January 2016, Acoustic & Lighting System (A&L) Singapore organized a Clay Paky Appreciation Night as a gesture of appreciation to their clients who had been supporting A&L throughout the years of services. The event,... read more
CLAY PAKY AT LIVE/MIR 2016
April 26, 2016
Clay Paky is thrilled to be celebrating its 40-year milestone at Live/MIR 2016 and welcomes visitors to the Clay Paky Universe, inviting you to get up close and personal with its broad portfolio of trailblazing creative tools. We launch the SCENIUS... read more
Clay Paky shines at Prolight+Sound 2016
April 14, 2016
Clay Paky launched three new products for the first time internationally at ProLight+Sound 2016, all of which aroused considerable interest among industry professionals. The products were the stars of a demo/multimedia light show which accompanied... read more
Clay Paky’s industry leading fixtures on show in South Korea
February 25, 2016
South Korea – More than 120 industry professionals representing 70 companies attended an Open Day held by Clay Paky’s South Korea sales partner Tongsuh Technoloy Co Ltd in February to experience the latest Clay Paky fixtures. H.R Shin from... read more
Clay Paky wins the most important lighting awards in America at LDI
November 1, 2015
Las Vegas, USA - The 2015 edition of LDI revealed a lively market, and was yet another success for the Italian company. In addition to gaining the visitors’ approval for its new products, Clay Paky also won the two most significant international... read more
Clay Paky shines on Prolight+Sound 2015
April 23, 2015
Prolight+Sound 2015 was a great success for Clay Paky. The sixty demos that were held one after the other inEnglish and German during the four-day fair were seen by more than 10000 people, with an average of 150-200 spectators at each. The Clay Paky... read more