Clay Paky - Stage Scan

Stage Scan

C11155 (*)

Conform to the European Community Directives

The fitting mounts a high-pressure lamp that needs an external igniter

It is permissible to mount the fitting on normally flammable surfaces

Class 1 appliance according to standard EN 60598-1

The fitting is protected against penetration by solid bodies of over 12mm (0.47”) in diameter, but not against dripping water, rain, splashes or jets of water

Maximum temperature that can be reached on the external surface of the fitting, in a thermally steady state

Stage Scan is Clay Paky's most sophisticated moving mirror fixture. It has an extremely rich set of graphic effects and a sophisticated beam colouring system. Its exclusive Multi-Step-Zoom system provides a wide range of beam angles. It is a sound reliable light designed specifically for all stage lighting applications that need faster beam movement than can normally be achieved with a moving head.

1200 W discharge lamp
MSZ (multi-step zoom) system for the beam angles of 6 different lenses (from 13° to 25°)
Graphic system: 4 fixed gobos + 4 rotating gobos + 4 rotating prisms + 1 fixed prism
10 optional gobos supplied as standard, stored inside the light casing
CMY colour system + colour wheel (including CTO and CTB filters)
Special effect filters (two-colour beams, four-colour beams and ultraviolet)
Three frost filters
High speed iris
0-100% dimmer with instantaneous blackout
Independent access to the effects compartment, the lamp and the electronics

(*) Note: the code number refers to the projector without mirror head

details
accessories
download

POWER SUPPLIES

• 230V 50Hz
• 240V 50Hz
• 208V 60Hz
• 200V 50Hz
• 200V 60Hz

INPUT POWER

1500VA at 220V 50Hz (PFC 140µF).

LAMP SOURCE

1200W discharge lamp:
- Type: HMI 1200W/GS
- Cap: SFc 15,5-6
- Color Temperature: 6.000 K
- Luminous Flux: 110.000 lm
- Average Life 750 h
- Hot Restrike

OPTICS

Elliptic reflector with high luminous efficiency
MSZ (Multi Step Zoom) with the following beam angles: 13°; 14,5°; 16°; 18°; 21°; 25°
Electronic focusing

COLOR SYSTEM

Color Mixing CMY

A wheel with 7 interchangeable colors and special effects (Ø 47mm), including concentric-color filters, 4-color filters, CTO, CTB, UV filter

EFFECTS SECTION

1 wheel with 4 fixed and interchangeable metallic gobos (Ø 66mm)
1 wheel with 4 rotating, indexable and interchangeable gobos, including two glass gobos (Ø 51,8mm)
10 additional gobos, supplied
1 wheel with 4 rotating and indexable prisms
Fixed prism
High-speed iris
0-100% Dimmer with instantaneous beam stop
1 - 7 flash/sec. strobe, black-out 70 msec.
Frost wheel with 3 frost filters, including the exclusive Clay Paky "flou effect"

CONTROL AND PROGRAMMING

16 or 17 DMX 512 control channels
DMX signal connection: 3 and 5 pole XLR input and output

BODY

In die-cast and extruded aluminium
Epoxy powder painting
Four side handles for transportation

MOVING MIRROR

Head rotable through 360° on projection housing
Graduated scale for easy and accurate positioning
Anchorage for safety wire
Mirror of ultra-high luminous efficiency
Variable speed of rotation. Maximum values:
- PAN = 0.4 sec (150°); TILT = 0.3 sec (110°)
Continuous and uniform movement. Resolution:
- PAN = 0.6° (150°); TILT= 0.4° (110°)

SUPPORT

Steel bracket with expody powder painting
Six installation positions, 25mm (1") apart.
Bracket adjustable through 100°, with graduated scale to assist positioning
Anchorage for safety wire

SAFETY DEVICES

Automatic break in power in case of overheating
Automatic disconnection of the power supply at the opening of the re-lamping cover
Forced ventilation with axial fans.

WORKING POSITION

Functions in any position.

CE MARKING

In conformity with the European Union Low Voltage Directive 2006/95/CE and Electromagnetic compatibility Directive 2004/108/CE.

WEIGHT

40 Kg (88 lbs)
3,1 Kg (6lbs 13 oz) mirror adapter

	HMI 1200W/GS (6000 K) OSRAM LAMP STANDARD code: L10030
	SAFETY CABLE STANDARD code: 105041/001 safety cable Ø 4mm, lenght 1000mm
	MIRROR ADAPTER OPTIONAL code: C21061G
	CLAMPS OPTIONAL code: C21070 48-51mm, max 300 Kg hook for truss
	FAN COVER KIT OPTIONAL code: C31144
	FLIGHT CASE WITH CASTERS OPTIONAL code: F21120
	FLIGHT CASE WITHOUT CASTERS OPTIONAL code: F21121
	STATIC VERTICAL FLOOR STAND OPTIONAL code: C21029
	ADJUSTABLE WHEEL MOUNTED FLOOR STAND OPTIONAL code: C21030
	ADAPTOR KIT FOR DICHROIC/PHOTOGRAPHIC GOBOS Ø 51.8 MM (FOR USE ON FIXED GOBO WHEEL) OPTIONAL code: C21025 Adaptor kit for dichroic/photographic gobos Ø 51.8 mm (for use on fixed gobo wheel)
	ADAPTOR KIT HOLDER FOR DICHROIC/PHOTOGRAPHIC GOBOS Ø 45 MM FOR USE ON FIXED GOBO WHEEL OPTIONAL code: C21026 Adaptor kit holder for dichroic/photographic gobos Ø 45 mm for use on fixed gobo wheel
	ADAPTOR KIT HOLDER FOR DICHROIC/PHOTOGRAPHIC GOBOS Ø 51,8 MM FOR USE ON ROTATING GOBO WHEEL OPTIONAL code: C21027 Adaptor kit holder for dichroic/photographic gobos Ø 51,8 mm for use on rotating gobo wheel
	ADAPTOR KIT HOLDER FOR DICHROIC/PHOTOGRAPHIC GOBOS Ø 45 MM FOR USE ON ROTATING GOBO WHEEL OPTIONAL code: C21028 Adaptor kit holder for dichroic/photographic gobos Ø 45 mm for use on rotating gobo wheel