Single element lens 1:2.4/100 mm

Single element lens 1:4/165 mm

Single element lens 1:4.4/200 mm

Multi-element lens 1:2.8/45 mm

Multi-element lens 1:2.8/60 mm

Multi-element lens 1:2.8/85 mm

Multi-element lens 1:2.8/120 mm

Multi-element lens 1:3.5/150 mm

Zoom lens 1:3.5/70-120 mm

Supplied as standard, it contains the chosen lens unit and allows the mounting of mirror accessories; by appropriately positioning it on the rails the projected image is perfectly in focus. The mount is supplied together with a lens hood that, when fitted, eliminates undesired light emissions.

A manually adjustable diaphragm to widen or narrow the beam of light. It can, for
instance, restrict the beam of light onto a subject, using the light as a small spotlight.ates undesired light emissions.

Four blades with an adjustable angle and depth of insertion so they can fully shut off the beam of light, in order to mark the outline of the projection with straight lines; suited, for instance, to illuminate a painting, following the perimeter of the frame

Blade shutter that is manually engaged or disengaged to stop the emission of the beam of light, for instance when using the iris diaphragm as well, the projector is used as a spotlight.

Three housings for gobos and filters of different diameters: dichroic gobos diameter 51.8 mm / metal gobos diameter 53.3 mm D-size / colour filters diameter 47 mm. It is fixed with rings that are simple to put in and take out; it is used to project a fixed image, to colour the beam of light or to colour the image projected by the gobo. With a specific adapter (C21035) it is also possible to mount gobos of diameter 31.5 mm.

Rectangular in shape, it is mounted in front of the lens unit and adjusted manually in the
required position to direct the projection onto a specific area, keeping the projector orientation fixed. Useful in places where direct projection is not possible, it makes it harder to locate the light source.

Rectangular mirror oscillating on its own axis with an adjustable travel for projecting
an image onto a wall, column or floor with the effect of it moving from left to right or
from top to bottom and vice versa; speed of travel: 2 rpm.

To project a moving image on an elliptic or circular path by means of a circular mirror
continuously turning on its axis, which may also be angled to increase the diameter
of the path travelled; speed of rotation: 2 rpm.

A rotating cylinder on which a set of mirrors are mounted providing continuous and multiple reflections of the image, to project an animated image, which travels along the same pathway in succession; speed of rotation: 2 rpm.

Multiplies the image with a comet effect that continuously turns around a fixed image,
giving the projected image a three-dimensional appearance, emphasised by the continuous rotation; speed of rotation: 4 rpm.

Multiplies the projected image by 4 and turns it on its axis continuously, making a full,
continuously moving image; speed of rotation: 4 rpm.

Mounted in front of the lens unit and continuously turning on its axis, this prism gives the projected image a soft and gradual effect of extension that reaches its fullest extension when the prism is perpendicular to the axis of projection, to then gradually return to the basic dimensions of the image when the prism is in its parallel position; speed of rotation: 0.5 rpm.

Instantaneously shuts off and makes the beam of light reappear at set time intervals, creating an effect that especially draws attention to an image that is continually appearing and disappearing; timing from 1 sec. to 3 min.

The same accessory is available with the possibility of control via a 0-10V analogue control unit.

The disc is mounted on a motor that turns it continuously at a speed of 60 rpm (1 turn per second) with a resulting effect of 4 flashes a second.

Gradually cuts off and equally gradually makes the beam of light reappear in a continuous cycle, creating a fading effect that progressively darkens the projected image that, again progressively, then reappears; speed of rotation: 15 rpm.

The same accessory is available with the possibility of control via a 0-10V analogue control unit.

A wheel with 8 positions on which 7 dichroic colour filters are fitted as standard (ultra-pure, long-life and interchangeable with other colours available from the catalogue); it is used to colour the beam of light and projected image, choosing from eight colours, or to change colour continuously; passing from one colour to another takes place at pre-set time intervals defined by a timer; timing from 1 sec. to 3 min.

The same accessory is available with the possibility of control via a 0-10V analogue control unit.

A wheel with 8 positions on which 7 dichroic filters are fitted as standard (ultra-pure, long-life and interchangeable with other colours available from the catalogue); passing from one colour to another is continuous; the effect is that the beam of light or projected image are coloured, changing colour continuously, and, during rotation, obtaining two-tone beams; speed of rotation: 2 rpm.

For dichroic or metal gobos of diameter 31.5 mm. It turns to contain up to 8 images, not as standard, that may be chosen from a vast catalogue and interchanged as preferred; they can be projected either singly or in succession at predefined time intervals; timing from 1 sec. to 3 min.

The same accessory is available with the possibility of control via a 0-10V analogue control unit.

Dichroic/photographic (Ø 51.8 mm) or metallic (Ø 66 mm M-size); the gobos are not supplied as standard and may be chosen from a vast catalogue; the effect generated is a continuously rotating image; speed of rotation: 4 rpm.
With specific adapters it is also possible to mount gobos of diameter 31.5 mm (C21035) or 53.3 mm (C21036).

With the Sound-to-Light circuit, completely inside the accessory, the audio signal affects the direction and speed of rotation of the gobo.

Special metal disc, diameter 130 mm, of which, during rotation, only the portion illuminated by the optical unit gets projected; the beam of light is continuously modelled with the graphic shapes obtained in the disc, which turns smoothly; various discs are available with different graphics; speed of rotation: 2 rpm.

With the Sound-to-Light circuit, completely inside the accessory, the audio signal affects the direction and speed of rotation of the disc.

Treated glass disc of diameter 130 mm that, by modelling the projected image, gives it an undulatory motion typical of the effects of flags waving in the wind, rolling waves or fire and heat; the projected image stays readable; speed of rotation: 2 rpm or, alternatively, 15 rpm.

Treated glass disc of diameter 130 mm that, by modelling the projected image, gives it an undulatory motion typical of the effects of flags waving in the wind, rolling waves or fire and heat; the projected image stays readable; speed of rotation: 2 rpm or, alternatively, 15 rpm.

It protects the projector against bad weather in outdoor installations. It is made of aluminium and plexiglass (IP23). It can be lifted up, without being removed, making it possible to easily carry out the normal processes of changing over effects and maintenance work. It is not suitable for housing projectors that use accessory C52159.

Bracket with 4 holes for fixing to the wall. Fitted in the two different positions, it permits mounting the shelf towards the top or bottom. The projector can be turned completely around its point of anchorage to obtain the best working position.

Plate for fitting the projector on a horizontal surface. It can be fixed (either on the ceiling or a top) through the 4 holes already made in the plate. The bottom side is covered with non-slip rubber.

A fixing plate that can be combined with the ceiling plate. It permits sandwich installation on any mounting that permits using at least 2 of the 4 holes available on the two plates.

A telescopic mounting that can be combined with the 4-hole fixing plate. After fitting the fixed portion of the mounting inside the false ceiling, take out the extending portion and lock it in the required position. It is available in two versions: for false ceilings with a depth of 40 - 70 cm and 70 - 105 cm.

A telescopic mounting that can be combined with the 4-hole fixing plate. After fitting the fixed portion of the mounting inside the false ceiling, take out the extending portion and lock it in the required position. It is available in two versions: for false ceilings with a depth of 40 - 70 cm and 70 - 105 cm.

Permits fitting metal or dichroic gobos of Ø 31.5 mm on all accessories for effects that fit gobos of Ø 51.8 mm or slides of 50 mm x 50 mm.

Permits mounting gobos of a smaller size than the standard one of Ø 66 mm (M-size) on the "Rotating Gobo" accessory.

Optional rails are available in 130 mm and 210 mm lengths, instead of the standard rails 170 mm long. By using the two kits it is possible to get around the problems of mounting accessories and especially mirrors that are found in some combinations.

Optional rails are available in 130 mm and 210 mm lengths, instead of the standard rails 170 mm long. By using the two kits it is possible to get around the problems of mounting accessories and especially mirrors that are found in some combinations.

Make fixing possible on tubular trusses of diameter between 15 - 35 mm and 30 - 50 mm.

Make fixing possible on tubular trusses of diameter between 15 - 35 mm and 30 - 50 mm.

For mobile or temporary installations, available in two versions.
Basic model, made entirely of aluminium, 2 sections, 1 sleeve, extending from 100 to 190 cm, 1 adjustable foot for levelling.

For mobile or temporary installations, available in two versions.
Special model, in aluminium and chrome-plated steel, 2 sections, 1 sleeve, extending from 90 to 150 cm, 1 adjustable foot for levelling, memory ring.

Dichroic colour filter  Ø 31,5 mm light blue

Dichroic colour filter  Ø 31,5 mm yellow

Dichroic colour filter  Ø 31,5 mm green

Dichroic colour filter  Ø 31,5 mm violet

Dichroic colour filter  Ø 31,5 mm red

Dichroic colour filter  Ø 31,5 mm pink

Dichroic colour filter  Ø 31,5 mm dark orange

Dichroic colour filter  Ø 31,5 mm cyan

Dichroic colour filter  Ø 31,5 mm amber

Dichroic colour filter  Ø 31,5 mm light green

Dichroic colour filter  Ø 31,5 mm magenta

Dichroic colour filter  Ø 31,5 mm ultraviolet

Warm colour temperature conversion

Cold colour temperature conversion

Dichroic colour filter  Ø 47 mm light blue

Dichroic colour filter  Ø 47 mm yellow

Dichroic colour filter  Ø 47 mm green

Dichroic colour filter  Ø 47 mm violet

Dichroic colour filter  Ø 47 mm red

Dichroic colour filter  Ø 47 mm pink

Dichroic colour filter  Ø 47 mm dark orange

Dichroic colour filter  Ø 47 mm cyan

Dichroic colour filter  Ø 47 mm dark blue

Dichroic colour filter  Ø 47 mm medium blue

Dichroic colour filter  Ø 47 mm amber

Dichroic colour filter  Ø 47 mm dark green

Dichroic colour filter  Ø 47 mm  light green

Dichroic colour filter  Ø 47 mm turquoise

Dichroic colour filter  Ø 47 mm dark red

Dichroic colour filter  Ø 47 mm purple

Dichroic colour filter  Ø 47 mm light orange

Warm colour temperature conversion

Cold colour temperature conversion

Dichroic colour filter  Ø 47 mm ultraviolet

Dichroic colour filter  Ø 47 mm magenta

Dichroic colour filter  Ø 47 mm  blue with hole

Dichroic colour filter  Ø 47 mm  yellow with hole

Dichroic colour filter  Ø 47 mm  in four colours