ALPHA BEAM 300
19,1 kg - 42 lbs (electronic)

ALPHA BEAM 300
Exclusively presented by Clay Paky, ALPHA BEAM 300 produces a superconcentrated near parallel light beam, for a use very similar to that of a Par 64 ACL, always present in all the big Rock’n’Roll shows, but with superior and innovative features.
The new, special Clay Paky optical group, with a 300 W lamp produces three times the brightness as that of an ordinary 1200 W wash projector, generating an extraordinary “tube of light” with a natural beam of 8°.
The aperture and graphics of the “tube of light” can be decided at will by using the 8 fixed gobos available, while a linear frost can be used to pass from a narrow hard beam to a more or less soft one.
CMY colour mixing and a colour wheel (8+1) allow the light beam to be coloured at will.
A Dimmer on a dedicated channel, stop/strobe and high speed Pan/Tilt complete the ALPHA BEAM 300 configuration.
Innovative and complete, compact, service friendly and easy to install and use, ALPHA BEAM 300 is the ideal Moving Light Beam for “live” professional use especially “long throw” to cut through the brightness of stage washes or LED backgrounds, with Aircraft Landing light effects never seen before.
MORE INFO
An exclusive MOVING LIGHT BEAMThe only 300W Moving Light Beam on the market able to release an Aircraft Landing light effect from a powerful, light and compact moving body.
Like an ACL Par64, the Alpha Beam 300 can be used in “live” environments, especially for “long throw” use, and in addition to the former offering a series of graphic and movement capacities impossible to imagine so far.
The new special Clay Paky optical group, with a 300W lamp and an unique elliptical reflector with a smooth surface is three times brighter than an ordinary 1200W wash projector, generating an extraordinary “tunnel of light” with a natural beam of 8°.
Complete GRAPHICSThe opening and graphics of the “tunnel of light” can be decided at will with the 8 fixed gobos available as standard (4 standard gobos + 4 beam angle reduction gobos) and easily interchangeable.
Patented FROSTThe innovative frost system (Patent Pending), based on the inclusion of two high quality diffusion filters, allows the linear passage from a sharp beam to a soft one with two angles of diffusion, typical of a regular wash, with the obvious advantages of the two projection modes.
The COLOR makes the differenceCMY + Color Wheel (8+1) that allow the light beam to be colored at will, exceeding the traditional concentration of the Par64, which requires the manual insertion of gelatine filters. 2 CTO filters (3200K and 2500K), 1 CTB filter and a selection of new colors particularly demanded for professional use: Orange, Aquamarine, deep Green, deep Blue (Night Light effect) and saturated Red.
The color wheel uses a new snap-shot system that increases the color changing speed.
The first product in its category with a standard electronic ballast that means total absence of flickering, a universal power supply selectable automatically and, naturally, the product weighs less.
Wide and fast PAN and TILT movementsUnlike an ACL Par64, with a 540° PAN and a 250° TILT, the Alpha Beam 300 superconcentrated light beam can be pointed and moved with ease onto the stage, the audience, the ceiling or towards the sky for open-air events. Three-phase motors have been introduced in the Alpha Beam 300 to allow faster Pan (2.75sec/540°) and Tilt (1.65sec/250°) movements.
TECHNICAL DATA
Power supplies available
Version with electronic ballast (with PFC):
100 - 120V 50/60Hz
200 - 240V 50/60HzInput power
550VA at 230V 50HzLamp
Discharge lamp with built-in power supply unit.- Type MSR Gold 300/2 FastFit
- Cap PGjX28
- Colour temperature 8000 K
- Luminous flux 22000 lm
- Average life 750 h
- Any working position
- Type MSR Gold 300/2 FastFit
Motors
12 stepper motors, operating with microsteps, totally
microprocessor controlled.Optical unit
- Elliptic reflector with high luminous efficiency
Channels
- Max 18 control channels.
Inputs
- DMX 512
Movable body
- Movement by means of two stepper motors, controlled by
microprocessor. - Automatic repositioning of PAN and TILT after accidental
movement not controlled by control unit. - Travel:
PAN = 540°, TILT = 250° - Maximum speeds:
PAN = 3.15 sec (Stnd) / 2.75 sec (Fast)
TILT = 1.95 sec (Stnd) / 1.65 sec (Fast) - Resolution:
PAN = 2.11° - PAN FINE = 0.008°
TILT = 0.98° - TILT FINE = 0.004°
- Movement by means of two stepper motors, controlled by
IP20 protection rating
- Protected against the entry of solid bodies larger than
12mm (0.47”). - No protection against the entry of liquids.
- Protected against the entry of solid bodies larger than
CE Marking
In conformity with the European Union Low Voltage Directive
2006/95/CE and Electromagnetic compatibility Directive 2004/108/CE.Safety Devices
- Bipolar circuit breaker with thermal protection.
- Automatic break in power supply in case of overheating or
failed operation of cooling system.
Cooling
Forced ventilation with axial fans.Body
- Aluminium structure with die-cast plastic cover.
- Two side handles for transportation.
- Device locking PAN and TILT mechanisms for
transportation and maintenance.
Working position
Functioning in any position.
CHANNELS
| CHANNELS | EFFECTS |
|---|---|
| 1 | Cyan |
| 2 | Magenta |
| 3 | Yellow |
| 4 | 8+1 Color Wheel |
| 5 | Stop-Strobe |
| 6 | Dimmer |
| 7 | Fixed gobo wheel Wheel with 8 fixed and easily interchangeable gobos, with variable rotation and selectable "gobo shake" function |
| 8 | Frost |
| 9 | Pan |
| 10 | Pan Fine |
| 11 | Tilt |
| 12 | Tilt Fine |
| 13 | Reset |
| 14 | Lamp on/off |
| 15 | Pan-Tilt Time |
| 16 | Color Time |
| 17 | Beam Time |
| 18 | Gobo Time |


