Volero Batten Aqua


Volero Batten Aqua Volero Batten Aqua
Volero Batten Aqua
Conforme alle Direttive della Comunità EuropeaApparecchio di Classe 1 secondo la norma EN 60598-1Temperatura massima raggiungibile sulla superficie esterna dell’apparecchio, in condizioni di regime termicoDistanza minima dagli oggetti illuminati Massima temperatura ambiente consentitaQuesto dispositivo è conforme alla Direttiva Europea 2012/19/UE - Rifiuti di apparecchiature elettriche ed elettroniche (RAEE). Nel rispetto dell'ambiente, smaltire/riciclare il prodotto al termine del suo ciclo di vita secondo le disposizioni di leggeNon adatto all'illuminazione domesticaIl prodotto è concepito per essere utilizzato nei seguenti ambiti: studi, palchi, teatri, esposizioni, fiere, eventi, parchi a tema, locali di intrattenimento, illuminazione architetturale e similicMETusTrasmettitore Radio: questo prodotto contiene un trasmettitore radio - Massima potenza in uscita: 26.04 dBm - Banda di frequenza 2403-2479 MHzResistente all'acqua contro potenti gettiUKCA - Comply to the UK regulations

A high-performance LED bar for outdoors

First one in the VOLERO line of high-performance LED bars, VOLERO BATTEN AQUA is a new fixture that brings all the Claypaky quality but now for outdoor use in all weathers.

From the first glance you will notice that Volero Batten Aqua is a different moving batten than usual. The light source is in fact made up of 10 x 60W Osram RGBW LEDs, capable of emitting a much higher light power than most of the LEDs bars on the market. Each LED adopts 80x80mm lenses, a very unusual width that allows you more versatility with focussing the power of the LEDs, optimizing their luminous efficiency and resolution.

Volero Batten Aqua offers another important feature, it allows separate control of the Zoom in 2 groups from 5 adjacent lenses, creating a dynamic movement of the light beam that is truly unique and unmatched on the market. It is spectacular to see in operation.

In addition, as an exclusive feature of the entire new Claypaky "Effect Lighting" line, Volero Batten Aqua also offers Advanced Layers Management, with which the operator can choose to use different levels of effects simultaneously.

All these optical, constructive and advanced firmware characteristics give the product an unmistakable appeal, this is particularly stunning when multiple bars connected in seamlessly and for backlight effects.

With its IP66 protection rating, optional Wireless DMX control, a large amount of effects and built-in macros it is the perfect product for the touring, event, television and installation market, and works equally well for both indoor and outdoor applications.


  • Light source: 10x60W RGBW Osram LEDs
  • 10 single pixels with possibility of pixel mapping
  • 80 x 80mm square lenses
  • 4° to 55° zoom aperture
  • Zoom control: 2 individual zooms, each for 5 lenses
  • Advanced Layers Management (Background Color – Internal Shape – Pixel Mapping)
  • RGBW color mixing
  • Virtual CTO 2500-8000K
  • Macro function: Built-in Marcos for effects and speed control
  • Tilt > 215°
  • Electronic linear dimmer 24 bit
  • Electronic strobe @25 f/sec
  • Enhanced electronic engine for dynamic beam pattern design, with digital accuracy and repeatability
  • Great readability of the light beam in camera
  • Possibility of mounting on Panify for volumetric projections
  • Control signal: USITT DMX 512
  • Protocols: RDM, WebServer , Art-Net, sACN and kling-net
  • Optional Wireless DMX - WDMX
  • Software reprogram availability between units or via Ethernet
  • CloudIO Ready: fully compatible with CloudIO
  • Power: 800 VA@230Vac 50Hz
  • IP66 rating
  • Weight: 29Kg
  • Dimensions: 1 mt length




Electronic auto range with active PFC


Max Power consumption: 800W


10 x 60W RGBW Osram LEDs
80x80mm square lenses
Color Temperature: 8000K to 2500K
LED life expectancy: 50000Hrs L70*
*It may vary depending on various factors, as type of use and environment


Zoom range: 4°- 52°
7518 Lumen Output (Integrating Sphere)
High efficiency optical system

Theatre mode: 48.9 dBA
Auto mode: 49.8 dBA
Constant mode: 55.3 dBA

Personalities: 3 modes with 16/34/33 control channels – Pixel Engine 30 and 40 channels
Wireless DMX system as standard (Wireless Solution)
Control Protocol: DMX, Art-Net, RDM, sACN
DMX and RDM connectors: Locking 5 pin XLR IN/THRU
Ethernet port: RJ45 IN/OUT
Power connector: PowerCon True1 IN/OUT
Built In Web Server

Individual LED control for each parameter
White CT emulation 8000K to 2500K
Beam edge softening control (in wash mode)
Zoom Control:2 individual zooms 5 lenses each
Exclusive parallel beam consisting of an array of individually controllable-beams
RGBW color mixing system
Pre-programmed Shape macro pixel effects
16bit resolution with 5 different dimmer curves
Electronic strobe/stop from 1 to 25 f/sec
Pixel mapping control
Unique “Advanced Layer managing” selection (Just in Advanced mode)
Tilt: 220° - 16bit
Fast/Normal speed selectable by Function channel
Mechanical Tilt lock for safe transportation and maintenance

Long life self-charging battery
Display Graphic LCD backlit b/w Display
Firmware upload from another fixture
Firmware Upgrade via Web Server
DMX monitoring
Remote access through RDM
Cloud/IO compatibility

Aluminum and steel structure with plastic parts
IP66 protection rate

Working in any position
Hanging system: with fast-lock omega clamps (1/4 turn) on the base
Fully compatible with Panify for volumetric projection

Max ambient temperature 45°C (113°F)
Min ambient temperature -20°C (-4°F)
Max temperature of the external surface 90°C (194°F)
Total heat dissipation: 2732 BTU/hr ±10% / 2880 kJ/hr ±10%

Minimum distance of illuminated objects 0.2 meters (8”)
Minimum distance from flammable materials 0.2 meters (8”)
Fuse T10A – 250V
Thermally protected power supply (overheating and cooling failure)
Forced ventilation with axial fans

CE: conforms to the European Directives
UKCA: conforms to UK Regulations
EAC: conforms to EurAseC Regulations
cMETus Listed

Carton box + Polystyrene
Carton box + Foam shell
Flight case + Foam shell (2 pos.)

29.4 Kg (64.8 lbs)
244 x 1000 (base dimension) - 358mm with vertical head (h)
Distance between two fixture 1000mm

Omega clamps x2: CA3024000102 (included)
Long bracket set: CA3039000102 (included)
PowerConTrue1 connector: CON00O (included)

ETL Power cord 1.5mt. (bare end with IP65 PowerConTrue1 connector): CAB02B-802 (optional)
Floor bracket: CA3025000102 (optional)
Frost 2°: CA3026000102 (optional)
Frost 5°: CA3027000102 (optional)
Frost 10°: CA3028000102 (optional)
Frost: 20°: CA3029000102 (optional)
Frost: 10-60°: CA3030000102 (optional)
Foam shell: F21336-001 (optional)
Flight case (2 pos.): CF1021 (optional)
Safety Chain: 105041-801 (optional)
Clamp: C21070 (optional)

Volero Batten Aqua


Puoi trovare manuali, canali DMX, diagrammi fotometrici, simboli CAD, accessori, parti di ricambio, firmware, schemi, note di servizio, ecc. sul nuovo portale Claypaky dedicato al Customer Care (accesso riservato):

Claypaky customer care

Effects Lighting - teaser
Volero Batten Aqua - Product Presentation