Shadow QS-ST
C11039
The Shadow QS-ST is a 1200 W intelligent followspot for medium-long range coverage needs. Its power and luminous efficiency make it particularly suitable for use in television or cinema.
Thanks to its reduced size and compact shape, it is recommended as a truss-mounted followspot. A system of interchangeable lenses (normal or optional wide-angle) means it can be used at an optimal range of between 10 and 30 metres.
- Intelligent short-throw followspot for medium-long range use
- 1200 W discharge lamp
- Adjustable electronic control panel (90°) with practical push buttons and sliders
- Standard 11.4° lens (optimal range of between 10 and 25 m)
- Optional 24.7° wide-angle lens (optimal range of between 5 and 10 m)
- Colour wheel with 7 colours + CTO filter + CTB filter
- Fixed gobo holder
- 0-100% iris with adjustable gradual opening speed
- 0-100% mechanical linear dimmer + stop/strobe
- Simultaneous control of several followspots from a remote control desk or single control panel.
POWER SUPPLIES
200 - 240V 50Hz
200 - 220V 60Hz
INPUT POWER
1500VA at 230V 50Hz
LAMP SOURCE
1200W discharge lamp
- Type: Osram HMI 1200W/GS
- Cap: SFc 15,5-6
- Color temperature: 6,000 K
- Luminous flux: 110,000 lm
- Average life: 750 h
OPTICS
Twin lens condenser
High luminous efficiency spherical reflector
Standard lens: 1:2.5/250mm (11,4°)
Optional wide angle for insertion inside the projector: (24,7°)
External focusing control on front lens
COLOR SYSTEM
Wheel with 7 interchangeable color filters + open
2 color correction temperature (CTO + CTB
EFFECTS SECTION
Iris
0-100% Dimmer
Stop strobe (1-7 flash / sec).
CONTROL AND PROGRAMMING
4 DMX 512 control channels
DMX signal connection: 5 pole XLR input and output
Digital serial input RS232/423(PMX)
0-10V analog input
Controlling one Shadow QS only
- Control from the built-in control panel (stand alone).
- Total control from the remote external desk, connected to the followspot via digital or analog signal (instead of the built-in panel).
- Both local and remote control. The built-in panel is connected up normally; the remote desk is connected to the spotlight analog input.
Controlling more than one Shadow QS
- Simultaneous control of all followspots from one remote control desk. Connect the first followspot and all other units in a chain to the desk via the digital in/out sokets. All the functions will be controlled from the remote desk according to the projector addresses.
- Simultaneous parallel control of more than one spotlight, from a single built-in control panel. Connect the first spotlight to the others in a chain via the digital in/out sockets. The control panel of the first spotlight acts as a controller for the other lights, opereating them simultaneously, with identical functioning.
BODY
In die-cast and extruded aluminium.
Epoxy powder painting.
SUPPORT
Steel bracket, with epoxy powder coated finish
Six installation positions, 25 mm apart
Bracket adjustable through 100° with graduated scale for position finding
SAFETY DEVICES
Automatic break in power supply in case of overheating
Power supply cut off automatically on opening the sidecovers.
Forced ventilation with axial fans.
WORKING POSITION
Any working position
CE MARKING
In conformity with the European Union Low Voltage Directive 2006/95/CE and Electromagnetic compatibility Directive 2004/108/CE.
WEIGHT
38 kg (83 lbs 10 ozs)
 |
HMI 1200W/GS (6000 K) OSRAM LAMPSTANDARD code: L10030 |
WIDE-ANGLE LENSES KITOPTIONAL code: C31128 |
|
SIDE MOUNTING KITOPTIONAL code: C31136 |
|
FIXED GOBO HOLDER KITOPTIONAL code: 105029/801 |
|
FIXED GOBO HOLDER KITOPTIONAL code: 105030/801 Fixed gobo holder kit for for Shadow QS-ST and Shadow Basic with wide-angle |
|
FAN COVER KITOPTIONAL code: C31144 |
|
FLIGHT CASE WITH CASTERSOPTIONAL code: F21127 |
|
FLIGHT CASE WITHOUT CASTERSOPTIONAL code: F21128 |
LD TOOLBOX
Manuals
MAINTENANCE TOOLBOX
