Skip to content
Home > Products > K-Eye K10 HCR

K-Eye K10 HCR

C61440

K-EYE HCR is an LEDwash light which provides total control over the quality of all forms of white or colored light. The new HCR technology used in the K-EYE is an exclusive electronic platform developed by Claypaky in conjunction with Osram to meet the needs of lighting designers all over the world who were not fully satisfied with the performance of LED devices in comparison with traditional lamps, in particular because of their incomplete color range, poor color rendering index and lack of consistency.

All these limitations have been overcome in the K-EYE HCR, and it is finally possible to produce every color, every nuance and every shade with satisfactory quality. The heart of the K-EYE HCR wash light is a LED light source consisting of a module with six chips, each for a different color: besides the three “classic” basic red, green and blue colors, Claypaky has added amber, cyan and lime. This exclusive Claypaky device provides a very wide color range with excellent color spectrum coverage.

  • Light Source
    19x6-color LED modules (R+G+B+Amber+Cyan+Lime)
  • Light Output
    5,500 lm
  • Zoom range
    6°- 50°
  • Effects
    Color system: R+G+B+Cyan+Amber+Lime LED module; Color Temperature control: Linear from 2500K to 8000K (CTO controlled mode plus RAGCB correction); Control of the colors: RAW mode, HSL mode, RGB mode, CMY mode; Halo Emulation 750W, 1000W, 1200W, 2000W, 2500W lamp emulation; Gamma Wave: Different chromatic curves for each color Macro: Dedicated color macro channel with 80 preselected colors; Electronic and linear dimmer, 16 bit; Strobe 24 flash/sec. Electronic, instant open and blackout. Variable speed pulsation
Data Sheet DMX Channels Photometrics PDF
Get In Touch

Highlights

  • EVERY COLOR, EVERY NUANCE AND EVERY SHADE WITH THE HIGHEST CRI
    EVERY COLOR, EVERY NUANCE AND EVERY SHADE WITH THE HIGHEST CRI

    K-EYE HCR is a LED washlight which provides total control over the quality of all forms of white or colored light. The new HCR technology used in the K-EYE is an exclusive electronic platform developed by Claypaky. With the K-EYE HCR it is finally possible to produce every color, every nuance and every shade with satisfactory quality. The heart of the K-EYE HCR washlight is a LED light source consisting of a module with six colors: besides the three “classic” basic red, green and blue colors.

  • THE “HCR” TECHNOLOGY INNOVATION
    THE “HCR” TECHNOLOGY INNOVATION

    HCR stands for High Color Rendering, and HCR technology delivers superior light quality and performance.
    The K-EYE range was designed to produce a light as close as possible to natural light. Until now, the completeness of the full spectrum achieved with the K-EYE was possible only with a halogen lamp.

  • PROPRIETARY, ADVANCED SOFTWARE
    PROPRIETARY, ADVANCED SOFTWARE

    The brand new sophisticated software algorithm is the brain of this system, ensuring the total control over the unit. The light produced by the K-EYE has a CRI reaching values that have never been achieved before by LEDs: the typical CRI value is 97 and it goes up to 99. These value were previously possible only with traditional technology.

  • ENHANCED OPTICAL SYSTEM
    ENHANCED OPTICAL SYSTEM

    The K-EYE HCR fits an extremely high quality optical unit, with proprietary lenses that guarantee even light diffusion and eliminate stray reflections. Special “rods” – optical bars with reflective internal surface – convey the light output from each LED of the lens. All light dispersion is eliminated. The light emitted is enhanced and the colors are perfectly mixed and uniform. A dedicated pc lens is at the top of each rod.

  • THE RICHEST COLOR MANAGEMENT EVER
    THE RICHEST COLOR MANAGEMENT EVER

    The projector can work in 4 operating modes: RAW Mode, HSL, RGB emulation and CMY emulation. RAW Mode enables specific control of each color. HSL Mode is based on a complex algorithm for a new type of management of both color and white light. In this mode, the CRI is kept constantly above 97, irrespective of color temperature.

Specs

Save as pdf and print

LIGHT SOURCE TYPE

  • Light sources: 6-color LED modules
  • LED module: R+G+B+Amber+Cyan+Lime
  • Number of LEDS: 19
  • LED life expectancy: min. 50,000h
  • Total lumen output: 5,500 lumen
  • Typical lumen manteinance: 70%@50,000 hours
  • Typical CRI value > 97 up to 99
    *It may vary depending on various factors, as type of use and environment

PHOTOMETRIC DATA

  • Optics featuring 6-color LED module system
  • rod-bar mixing system 
  • 6°- 50° linear electronic Zoom

COLOR SYSTEM 

  • Color system: R+G+B+Cyan+Amber+Lime LED module
  • Color Temperature control: Linear from 2500K to 8000K (CTO controlled mode plus RAGCB correction)
  • Control of the colors: RAW mode, HSL mode, RGB mode, CMY mode
  • RAW mode Enable specific control of each color
  • HSL mode function is based on algorithm. HSL parameters: HUE, HUE fine, Saturation, Crossfade, Path, Tint
  • RGB mode The projectors works in the same way as a classical RGB fixture
  • CMY mode The projectors works in the same way as a classical CMY fixture
  • Halo Emulation 750W, 1000W, 1200W, 2000W, 2500W lamp emulation
  • Gamma Wave: Different chromatic curves for each color
  • Macro: Dedicated color macro channel with 80 preselected colors

CONTROL and CONNECTIONS

  • 19/32 DMX 512 control channels - Control signal: USITT DMX 512
  • Protocols: sACN, RDM, WebServer and Art-Net 
  • Display: Graphic LCD backlit b/w display
  • Display battery: Long life self-charging buffer battery
  • Pan/Tilt Resolution 16 bit - Dimmer Resolution 16 bit
  • Movement control: vectorial
  • DMX signal connection: 3 and 5 pole XLR input and output
  • Firmware update: Software upload through DMX input

DYNAMIC EFFECTS

  • Electronic and linear dimmer, 16 bit
  • Strobe 24 flash/sec. Electronic, instant open and blackout. Variable speed pulsation
  • Movement: - PAN range: 540° - TILT range: 210°

HARDWARE and SOFTWARE

  • Long-life auto-charging buffer battery
  • Preset color and graphic effect macros
  • Function reset controllable from a central control unit
  • Menu-self-test function
  • Electronic check-up of every single parameter with error alarm
  • DMX level monitoring on each channel
  • Automatic internal data transmission error diagnostics
  • Firmware upgrade with no power
  • Firmware transfer from one light to another

HOUSING

  • Structure in aluminium with die-cast plastic cover
  • Handles Two side handles for transportation
  • Device locking PAN and TILT mechanisms for transportation
  • Optional frame for external gels and frost filters
  • Optional top hat (adjustable with the Zoom movement)

WORKING POSITION

  • Working position: Any
  • Hanging system: 2xfast-lock omega clamps (1/4 turn) on the base
  • Optional 48-51mm, max300Kg clamps; Ø 4mm, lenght680mm safety cable

ELECTRICAL

  • Operating Voltage: 100/240V 50/60 Hz
  • Max Power consumption: 750VA

THERMAL SPECIFICATION

  • Max ambient temperature 45°C (113°F)
  • Min ambient temperature -20°C (-4°F)
  • Max temperature of the external surface 90°C (194°F)
  • Total heat dissipation: 2562 BTU/hr ±10% / 2700 kJ/hr ±10%

SAFETY SPECS

  • Minimum distance of illuminated objects: 0.2 meters (8”)
  • Minimum distance from flammable materials: 0.2 meters (8”)
  • Max ambient temperature: 40°C (104°F)
  • Max temperature of the external surface: 90°C (194°F)
  • Bipolar circuit breaker with thermal protection
  • Automatic break in power supply in case of overheating
  • Forced ventilation withaxial fans

COMPLIANCE

  • In conformity with the European Directives:
  • 2014/35/EU - Safety of electrical equipment supplied at low voltage (LVD)
  • 2014/30/EU - Electromagnetic Compatibility (EMC)
  • 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS)
  • 2009/125/EC - EcoDesign requirements for Energy-related Products (ErP)
  • ETL This product it is available, on demand, with cETLus Listed Mark, that complies with the UL 1573, UL 8750 and CSA C22.2 No. 166
    standards.

PACKAGING

  • Carton box + Polystyrene
  • Carton box + Foam shell
  • Flight case + Foam shell (4 positions)

WEIGHT - SIZE

  • 16.5 Kg (36.38 lbs)

ACCESSORIES

  • Omega clamps: 2x183102/805 (included)
  • Power cord: CAB03D/802 (included)
  • Foam shell: F21288/001 (optional)
  • Flight case 4 positions + Foam shell: F21292 (optional)
  • Top-Hat Kit for K-EYE K20 C21096 
  • Filter/Gel holder Kit for K-EYE K10 C21094  (optional)
  • Safety Chain: 105041/003 (optional)

Dimensione prodotti

 

Technical Documentation

Data Sheet
DMX Channels
CAD Symbols
Photometrics PDF
Photometrics IES
Photometrics LTD
User Menu
Instruction Manual
Safety Information
GDTF
E-ASSIST

For all other detailed documentation login E-Assist

You can find manuals, datasheets, DMX channel charts, photometrics, CAD symbols, spare parts, firmware files, schematics, technical notes, etc... in the new dedicated Claypaky Customer Care website (restricted access)

Sign In

Catalogues and Brochures

K-Eye leaflet

Download PDF

Video

Thumbnail for video TFsTkxmZ5Hg
K-Eye K10 HCR demo presentation

Thumbnail for video 72icQY2D0MM
K-Eye K10 HCR product presentation

News

News

View all