Skip to content

B-Eye K30

CL3044
NEW Claypaky - RGB Lime Technology

Need a single fixture that runs wash, beam, and Kaleidoscopic effects without additional hardware? The B-EYE K30 is the complete re-engineering of Claypaky’s flagship multilens concept. This large-format 37 x 55W RGBL moving head packs 37 individually driven LEDs, a 3.7°–54.5° motorized zoom, and IP66 protection throughout, with endless Pan rotation and a Tilt safety brake for total reliability. Its RGBL engine marks one of the biggest performance leaps in B-EYE history: higher lumen output, CRI > 82, richer pastels, and camera-ready color, fully consistent across the whole B-EYE ecosystem. From large-scale touring to outdoor festivals and permanent installations, the K30 is built to drive the whole show.

Highlights that set B-EYE K30 apart:

  • Three Fixtures in One: Seamlessly switch between wash (3.7°–54.5° zoom), beam (long-throw punch), and Kaleidoscopic FX (Advanced Layers Management and pixel control with lens rotation), no need to choose.
  • The Leap Forward in Color: 37 individually driven RGBL sources deliver higher lumen output, CRI > 82, richer pastels, and improved white calibration for standout broadcast performance.
  • Built to Perform, Simple to Maintain: Individual heat pipes on every LED protect output consistency, a stepper motor-driven zoom replaces the K25’s linear actuator for more precise control, and driver boards are accessible in fewer than 20 screws.
  • IP66 Without Compromise: an active defogging system keeps the front glass clear, and the SunSafe Protection System auto-repositions the head on signal loss.
  • Freedom of Motion: Endless Pan rotation and a dedicated Tilt safety brake unlock infinite rotational looks, from slow aerial arcs to fast rhythmic spins, with the head held securely after power-down.
  • One Proven Platform: Shares its color engine and control logic across the entire B-EYE family for unified programming from show to show.

The B-EYE K30 is the new reference wash light built for large-scale touring, outdoor festivals, and permanent installations where reliability and performance are both non-negotiable. Ready to see it drive your next show? Contact us today and let’s set up a demo.

  • Light Source
    37 x 55W RGBL LED
  • Light Output
    up to 28,000 lm
  • Zoom range
    3.7°-54.5°
  • Effects
    Three operating modes: wash, beam, FX (Kaleidoscopic effects); Pixel Patterning Macros with enhanced control; Linear CTO 2500-8000K (16 bit); B-EYE Multilens Family cross-fixture color calibration; Control of each single LED (Pixel Mapping); Advanced Layers Management; Preset Macro Colors; Dimmer/Shutter: high-resolution 24-bit electronic dimmer with 5 curves; High-speed electronic strobe; 2 modes: Standard: 30 channels / Extended: 47 channels; Pixel engine : 148 channels
Press Kit Data Sheet DMX Channels
Get In Touch

Highlights

Specs

LIGHT SOURCE TYPE

  • RGB+L LED
  • CRI: >82
  • Color Temperature: 8000K
  • Lamp life expectancy: 50.000 hrs
    *It may vary depending on various factors, as type of use and environment

PHOTOMETRIC DATA

  • Zoom range: 3,7° to 54,5°
  • 28.000 Lumen Output 
  • Front lens diameter: ø330mm
  • High efficiency optical system

NOISE LEVEL

  • Auto mode: Variable noise / 100% Output
  • Full mode: 46.0 dBA / 100% Output
  • Medium mode: 42.0 dBA / 85% Output
  • Silent mode: 37.0 dBA / 65% Output
  • Ultra Silent mode: 29.0 dBA / 35% Output

CONTROL and CONNECTIONS

  • Personalities: 2 modes:
    • Standard: 30 channnels
    • Extended: 47 channels
  • Pixel engine: 148 channels
  • Control Protocol: DMX, Art-Net, RDM, sACN, CRMX (Timo FX) (Lumen Radio)
  • DMX and RDM connectors: Locking 5 pin XLR IN/OUT
  • Ethernet port: RJ45 IN/OUT
  • Power connector: PowerCon True1 IN/OUT
  • Built In Web Server
  • Fully compatible CloudIO

DYNAMIC EFFECTS

  • Colors: 
    • Built-in macros with enhanced pixel control
    • Preset colors
    • Linear CTO 2500-8000K (16 bit)
    • RGB+L color mixing
  • Rotating Effects:
    • Bi-directional rotating front lenses
  • Movement:
    • Tilt: 230°
    • Pan: Endless / 540° Electronic rotation 
    • Automatic repositioning
    • Tilt brake
    • Mechanical Pan/Tilt lock for safe transportation and maintenance
  • Beam:
    • Motorized Zoom
  • Dimmer/Shutter:
    • High resolution electronic dimmer - 24 bit, 5 curves

HARDWARE and SOFTWARE

  • Long life self-charging battery
  • Display Graphic LCD backlit b/w Display
  • Firmware upload from another fixture
  • Firmware Upgrade via Web Server
  • Diagnostic
  • DMX monitoring
  • Remote access through RDM
  • Sun safe protection

HOUSING

  • Magnesium and steel structure with plastic components
  • Two side handles for transportation
  • IP66 protection rate

WORKING POSITION

  • Working in any position
  • Hanging system: with fast-lock omega clamps (1/4 turn) on the base
  • Optional safety chain

ELECTRICAL

  • Operating Voltage: 100-240V, 50/60 Hz
  • Power Supply: Electronic auto range with active PFC
  • Max Power consumption: 1700W (16.0A) @ 100V / 1700W (8.0A) @ 240V

THERMAL SPECIFICATION

  • Max ambient temperature 45°C (113°F)
  • Min ambient temperature -20°C (-4°F)
  • Max temperature of the external surface 90°C (194°F)
  • Total heat dissipation: 5850 BTU/hr ±10% / 6150 kJ/hr ±10%

SAFETY SPECS

  • Minimum distance of illuminated objects 5 meters (16’ 5”)
  • Minimum distance from flammable materials 0.3 meters (1')
  • Thermally protected power supply (overheating and cooling failure)
  • Forced ventilation with axial fans
  • Battery fuse: T6.3A 250V
  • Main fuse: 20A 250V

COMPLIANCE

  • CE: conforms to the European Directives
  • UKCA: conforms to UK Regulations
  • cMETus Listed

PACKAGING

  • Carton box + Polystyrene
  • Carton box + Foam shell
  • Flight case + Foam shell

WEIGHT - SIZE

  • 37,6 Kg (82.9 lbs)
  • 430x400mm (base dimension) – 609mm with vertical head (h)
  • Distance between two fixtures 560mm

ACCESSORIES

  • Omega clamps: 2x183102/805 (included)
  • Power cord: CAB02B/802 (included)
  • Flight case: CF1054 (optional)
  • Flight case + foam shell (2 positions): CF1054F (optional)
  • Safety Chain: 105041/001 (optional)
  • Clamp: C21070 (optional)

 

Technical Documentation

E-ASSIST

For all other detailed documentation login E-Assist

You can find manuals, datasheets, DMX channel charts, photometrics, CAD symbols, spare parts, firmware files, schematics, technical notes, etc... in the new dedicated Claypaky Customer Care website (restricted access)

Sign In

Catalogues and Brochures

B-EYE K30 leaflet

Download PDF

Video

B-EYE K30 – Product Presentation