Conforme alle Direttive della Comunità EuropeaApparecchio di Classe 1 secondo la norma EN 60598-1Massima temperatura ambiente consentitaQuesto dispositivo è conforme alla Direttiva Europea 2012/19/UE - Rifiuti di apparecchiature elettriche ed elettroniche (RAEE). Nel rispetto dell'ambiente, smaltire/riciclare il prodotto al termine del suo ciclo di vita secondo le disposizioni di leggeIl prodotto è concepito per essere utilizzato nei seguenti ambiti: studi, palchi, teatri, esposizioni, fiere, eventi, parchi a tema, locali di intrattenimento, illuminazione architetturale e similiResistente all'acqua contro potenti gettiUKCA - Comply to the UK regulations

Claypaky focus of developing innovative and useful solutions for lighting take a bold new step with the development of the Claypaky PANIFY. The PANIFY allows you to take a static, non-moving fixture and turn it for dynamic effects.

The PANIFY is designed to accept not only Claypaky products such as the Tambora Batten or MINI-B PARLED AQUA, but most static lights from other brands that do not have the ability to pan. The PANIFY offers endless pan operation and various speeds and can accept fixtures up to 30 kilograms (66 pounds). When the load is 20 kilograms (44 pounds) or less, the unit can spin up to 50 RPM and when the load is greater than 20 kilograms, the unit can rotate the heavier loads up to 22 RPM to provide unparalleled effects.

The PANIFY has two power inputs – one input for the unit itself and the other for the mounted fixture. Because of the innovative design of the unit’s crossbeam, the power is routed from the enclosure to the crossbeam where the mounted fixture connects for its power and DMX; so, there are no concerns of tangled power or DMX cables when using the endless pan feature. The PANIFY only draws about 150 Watts of power and only requires a few channels of DMX to operate. The unit is already wireless DMX ready, so you do not have to run additional DMX cabling.

The PANIFY is not limited to fixtures and could be used to turn scenery, signs, screens and more. The unit is IP66 rated and can be used and hung in any position. The PANIFY expands and extends the usefulness of static fixtures or whatever you need to turn for your productions.  Its flexibility and versatility allow the PANIFY to be anything you need it to be.



  • Advanced tool turning fixtures, scenery, signs, screens into dynamic effects
  • Endless PAN rotation at various speed (up to 50 RPM)
  • Maximum load to be applied: 30kg (66 lbs)
  • Any hanging positions
  • DMX and WDMX (optional) controllable
  • IP66 protection rating
  • CloudIO Ready: fully compatible with CloudIO
  • Weight: 13.8 kg (30.4 lbs)
  • Size (LxWxH): 390 x 295 x 253 mm (15.3 x 11.6 x 10 in)




Operating Voltage: 100-240V, 50/60 Hz
Power Supply: Electronic auto range with active PFC
Max Power consumption: 220VA
Mains Out: 2300 VA @ 230V; 1250 VA @ 110V

Max Power consumption: 220VA
Mains Out: 2300 VA @ 230V; 1250 VA @ 110V

Personalities: Single mode with 5 control channels
Control Protocol: DMX, Art-Net, RDM, sACN
DMX and RDM connectors: Locking 5 pin XLR IN/THRU
Ethernet port: RJ45 IN
Power connector:  PowerCon True1 IN/OUT
Built In Web Server

Pan Endless
Max applicable weight: 30Kg (with the weight of the fixture balanced on the Panify)
Max rotation speed: 43RPM

Long life self-charging battery
Display Graphic LCD backlit b/w Display
Firmware upload from another fixture
Firmware Upgrade via Web Server
DMX monitoring
Remote access through RDM
CloudIO compatibility

Aluminum and steel structure with plastic covers
Two side handles for transportation
IP66 protection rate

Working in any position
Hanging system: with fast-lock omega clamps (1/4 turn) on the base

Max ambient temperature 45°C (113°F)
Min ambient temperature -20°C (-4°F)

Fuse 4A – 250V
Forced ventilation with axial fans

CE: conforms to the European Directives
UKCA: conforms to UK Regulations
EAC: conforms to EurAseC Regulations
cMETus Listed

Carton box + Polystyrene
Flight case + Foam shell (4 position)
Distance between two fixtures: depending from installed product

13.8 Kg (30.4 lbs)
390.8mm x 295mm x 252.8mm

ETL Mains cable, 1.5mt. (Bare Ends / IP65 PowerConTrue1 connector): CAB02B-802 (included)
Omega bracket: 2x 183102-805 (included)
Power cables 0.5mt.: 1x CAB0PR-801 (included)
DMX cable 0.5mt.: CAB0PS-801 (included)
Safety chains 0.5mt.: 2x FUN00C-001 (included)
Screws/Bolts/Washers: 4x 418100-801 (included)

Clamp: C21070 (optional)
Safety chain: 105041-003 (optional)
Power Con True1 connector: CON00O (optional)
Foam shell: F21329-001 (optional)
Flight case 4 pos.: CF1016 (optional)
Universal bracket: CA3017000102 (optional)


Puoi trovare manuali, canali DMX, diagrammi fotometrici, simboli CAD, accessori, parti di ricambio, firmware, schemi, note di servizio, ecc. sul nuovo portale Claypaky dedicato al Customer Care (accesso riservato):

Claypaky customer care

Panify - presentazione demo